HP EliteDesk 705 G2 Maintenance And Service Manual page 48
Microtower business pc
Hide thumbs
Also See for EliteDesk 705 G2:
- Hardware reference manual (58 pages) ,
- Product end-of-life disassembly instructions (17 pages) ,
- Disassembly instructions manual (13 pages)
Table of Contents
Advertisement
6.
Connect the power cable (1) and data cable (2) to the rear of the hard drive.
7.
If installing a new drive, connect the opposite end of the data cable to the appropriate system board
connector.
NOTE:
avoid any hard drive performance problems. If you are adding a second hard drive, connect the data
cable to one of the light blue SATA connector labeled SATA1 and SATA2.
8.
Replace the computer access panel.
9.
Reconnect the power cord and any external devices, and then turn on the computer.
10.
Lock any security devices that were disengaged when the access panel was removed.
40
Chapter 4 Removal and replacement procedures – Microtower (MT) chassis
You must connect the primary hard drive data cable to the dark blue connector labeled SATA0 to
Hide quick links:
Advertisement
Table of Contents
