Computer Setup-Advanced - HP EliteDesk 705 G2 Maintenance And Service Manual

Table 5-2 Computer Setup—Security (continued)
System Management
Command
Restore Security
Settings to Default
Computer Setup—Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.
Table 5-3 Computer Setup—Advanced (for advanced users)
Option
Select Language
Select Keyboard Layout
Boot Options
58 Chapter 5 Computer Setup (F10) Utility
Cover Removal Sensor (Disabled/Notify user/Administrator password)
Lets you disable the cover sensor or configure what action is taken if the computer cover was removed.
Default is 'Disabled'.
NOTE: Notify user alerts the user that the sensor has detected that the cover has been removed.
Administrator Password requires that the password be entered to boot the computer if the sensor
detects that the cover has been removed.
Allows authorized personnel to reset security settings during a service event. Default is enabled.
Restoring settings to default requires the BIOS Administrator password.
Heading
Lets you select the language of the menus in F10 Setup.
Lets you select language for the keyboard.
Startup Menu Delay(sec)
Enabling this feature will add a user-specified delay to the POST process. This delay is sometimes needed
for hard disks on some PCI cards that spin up very slowly, so slowly that they are not ready to boot by the
time POST is finished. The POST delay also gives you more time to select
Setup. Default is '0'.
Select the devices that the computer can boot from, as well as other options, including:
● Fast Boot. Default is disabled.
● CD-ROM Boot. Default is enabled.
● Network (PXE) Boot. Default is enabled.
SD Boot. Default is enabled.
●
● Netclone BIOS Boot. Default is disabled.
● Prompt on Memory Size Change. Default is enabled.
● Prompt on Fixed Storage Change. Default is disabled.
● Display Diagnostic URL. Default is enabled.
● UEFI Boot Order. Default is enabled.
Specify the order in which UEFI boot sources (such as a internal hard drive, USB hard drive, USB
●
optical drive, or internal optical drive) are checked for a bootable operating system image. Each
device on the list may be individually excluded from or included for consideration as a bootable
operating system source.
UEFI boot sources always have precedence over legacy boot sources.
● Legacy Boot Order
Specify the order in which legacy boot sources (such as a network interface card, internal hard drive,
USB optical drive, or internal optical drive) are checked for a bootable operating system image. Each
F10 to enter Computer (F10)