Front I/O And Power Switch Assembly - HP ProDesk 480 G2 Maintenance And Service Manual

Front I/O and power switch assembly

1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. From the inside of the computer, disconnect the three front I/O cables from the following system board
connectors:
● PB/LED
● FRONT USB3.0
● FRONT AUD
NOTE:
HP ProBook 400 and 490 G2 models
(Access panel on page
(Front bezel on page
System board layout may vary.
(Preparation for disassembly on page
26).
27).
25).
Front I/O and power switch assembly 51