Removing A Hard Drive; Installing A Hard Drive - HP EliteDesk 705 G2 Maintenance And Service Manual

Removing a hard drive

NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you
can transfer the data to the new hard drive.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Disconnect the power cable (1) and data cable (2) from the rear of the hard drive.
4. Pull the green latch next to the drive outward (1) and slide the drive out of the bay (2).

Installing a hard drive

1. Prepare the computer for disassembly
2. Remove the access panel
(Preparation for disassembly on page
(Access panel on page 20).
(Preparation for disassembly on page
(Access panel on page 20).
19).
19).
Drives 37