HP EliteDesk 705 G2 Maintenance And Service Manual page 63

Table 5-1 Computer Setup—Main (continued)
●
●
●
●
●
System IDs Lets you clear the following values:
●
●
Replicated Setup Backup current settings to USB device
Saves system configuration to a formatted USB flash media device.
Restore current settings from USB device
Restores system configuration from a USB flash media device.
Save Custom Defaults Saves the current system configuration settings as the default.
Apply Custom Defaults Applies the currently selected default settings and clears any established passwords.
and Exit
Apply Factory Defaults Restores the factory system configuration settings as the default.
and Exit
Ignore Changes and Exit Exits Computer Setup without applying or saving any changes.
Save Changes and Exit Saves changes to system configuration or default settings and exits Computer Setup.
Suppress POST Errors Suppresses most system messages during POST (Power On Self Test).
POST error messages are displayed on the display during the Power On Self Test if the BIOS encounters a
problem while starting the computer. A POST error message will only display on screen if the computer is
capable of booting this far. If the POST detects an error before this point, a beep code is generated
instead.
Serial Number
SKU Number
Product Family
System Board CT
Product Name
Asset Tracking Number
Ownership Tag
Computer Setup (F10) Utilities 55