Recovering The Configuration Settings - HP EliteDesk 705 G2 Maintenance And Service Manual

Table 5-3 Computer Setup—Advanced (for advanced users) (continued)
Configurations
Check for updates now
Scheduled Power-On

Recovering the Configuration Settings

This method of recovery requires that you first perform the Save to Removable Media command with the
Computer Setup (F10) Utility before Restore is needed. (See
Computer Setup—File table.)
NOTE: It is recommended that you save any modified computer configuration settings to a USB flash media
device and save the device for possible future use.
To restore the configuration, insert the USB flash media device with the saved configuration and perform the
Restore from Removable Media command with the Computer Setup (F10) Utility. (See
on page 54
62 Chapter 5 Computer Setup (F10) Utility
Enables or disables the charging capability of the USB charging port. Default is enabled.
Allows you to use F10 Setup to check for BIOS updates and apply them using either a manual selection or
an automatically scheduled check upon boot-up.
NOTE: If Windows BitLocker Drive Encryption (BDE) is enabled, HP requires that BDE be suspended
temporarily before the BIOS is flashed. You must get the BDE recovery password and PIN before
suspending BDE. After updating the BIOS, you can resume BDE.
Update Source (HP/Custom)
Selects hp.com or a locally managed custom address to serve BIOS updates. Default is 'HP'.
Update Address.
If 'Custom' is selected for Update Source, enter the URL of the locally managed server.
Update BIOS via Network (Enabled/Disable)
Enables or disables the network BIOS update scheduler. Default is 'Enable'.
Automatic Update Frequency (Daily, Weekly, Monthly)
If 'Enable' is selected for Update BIOS via Network, sets the frequency of checks to the BIOS update
server. If a newer version of BIOS is available on the network server, the system will prompt to update the
BIOS. Default is 'Daily'.
Automatic BIOS Update Setting
If 'Enable' is selected for Update BIOS via Network, during the next boot, checks whether an updated
BIOS is available and installs only specified updates. This value is independent of the Automatic Update
Frequency setting.
Available configurations include:
● Check and install all BIOS updates automatically
● Check and install only important updates automatically
● Check for BIOS updates but let me decide whether to install them
Default is 'Check and install all BIOS updates automatically'.
Select to check for the latest BIOS release revision on the network. Lets you decide whether to download
the BIOS image and update the system.
This feature wakes the system up from a powered off state at a specified date and time.
in the Computer Setup—File table.)
Computer Setup–Main on page 54 in the
Computer Setup–Main