Installing A 9.5 Mm Slim Optical Drive - HP EliteDesk 705 G2 Maintenance And Service Manual

Microtower business pc
Table of Contents

Advertisement

Installing a 9.5 mm slim optical drive

1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
If you are installing a slim optical drive in a bay covered by a bezel blank, remove the front bezel and
then remove the bezel blank. See
4.
Follow the instructions for removing the optical drive if one was installed. Refer to
slim optical drive on page
5.
Align the small pin on the release latch with the small hole on the side of the drive and press the latch
firmly onto the drive.
6.
Slide the optical drive through the front of the chassis (1) all the way into the bay so that the green latch
locks onto the chassis frame (2).
(Preparation for disassembly on page
(Access panel on page
20).
Front bezel on page 21
33.
19).
for more information.
Removing a 9.5 mm
Drives
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents