Processor - HP EliteDesk 705 G2 Maintenance And Service Manual

Processor

Description
AMD A10-8850B, 3.9 GHz
AMD A10-8750B, 3.6 GHz
AMD A10-7800B, 3.57 GHz
AMD A8-8650B, 3.2 GHz
AMD A8-7600B, 3.1 GHz
AMD A6-8550B, 3.7 GHz
AMD A6-8350B, 3.5 GHz
AMD A4-7300B, 3.8 GHz
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the fan sink
4. Rotate the locking lever to its full open position (1).
5. Carefully lift the processor from the socket (2).
CAUTION:
them could cause irreparable damage. Once pins are damaged it may be necessary to replace the
system board.
The heat sink must be installed within 24 hours of installing the processor to prevent damage to the
processor's solder connections.
Reverse the removal procedure to install a new processor.
(Access panel on page
(Fan sink on page
Do NOT handle the pins in the processor socket. These pins are very fragile and handling
(Preparation for disassembly on page
20).
44).
19).
Processor 45