Connecting Pneumatic Hose - SunStar SPS/D-B1201 SERIES User Manual

20. Connecting Pneumatic Hose

A. Connect the solenoid value and the coupling using the hose①.
B. Connect the both ends of the coupling to the regulators①, ② using the hoses ②, ③.
C. Insert the labeled hose into the linking part as in the figure.
Make sure to fully insert the hose until it does not move further.
hose 1
hose 3
①
②
③
⑤
⑥
④
solenoid
③
④
⑥
⑤
hose 2
regulator 2 regulator 1
[Figure 96]
44