G. While the machine is standing as shown in the Figure,
put the "V" - belt between the pulley and the motor.
( C-Series)
H. After connecting the V-belt, unfasten the fixing nuts①
and ② to give tension to the belt (D) by the weight of the
motor (C). Then tighten the nut① and ② consecutively.
( C-Series)
I. Be sure to connect the green grounding conductor that
links the motor to the machine. Connect the grounding
conductor wire between the control box and the motor.
( C-Series)
①
②
Pulley
V-Belt
Motor Cover
[Figure 7]
D
C
[Figure 8]
Grounding
Conductor
[Figure 9]
13