E. Use a screw ② to fix the speed controller ① onto the
speed controller bracket ③. Assemble it onto the arm
afterwards.
[Caution]
Be careful of the assembly direction of the speed
controller.
F. Cut off the lower hose of the presser foot-driving
cylinder. Connect it to the air hose of the needle
cooler, using the air fitting.
G. Link the hose with the left and right side of the speed
controller.
H. Fix the nozzle as shown in the figure and fix it firmly
with a screw.
24
③
①
②
[Figure 37]
[Figure 38]
[Figure 39]
[Figure 40]