SunStar SPS/D-B1201 SERIES User Manual page 46

Change in the moving scope of the presser foot due to scale readjustment
③
During sewing machine operation, the location of the scale plate② determines the moving
scope of the presser foot③.
The change in the moving scope of the presser foot③ corresponding to the scales from 0 to 4 is set forth in
the table above.
46
[Figure 99]
X Note
0 8
1 9 2 : Based on the
status when
2 10
released from
factory.
3 11
4 12
[ Table 1 ]