SunStar SPS/D-B1201 SERIES User Manual page 12

D. Attach the hinge metal and the hinge rubber on the
bed. Insert a fixing bolt into the hinge metal hole at
point① and fix it onto the table.
[Danger]
At least two or more people should move the
machine for safety.
E. Set the machine in the upright position as described in
the Figure. Insert the fixing bolt into the hinge hole at
point① and fix it onto the table.
[Danger]
Since the machine is not fully installed onto the table at
this point, pay extreme caution when you set the
machine in the upright position.
F. In case of SPS/D-B1201 series, assemble the safety
switch bracket ① on the bed as in the figure. Move the
safety switch bracket up and down to make sure that
the safety switch supporting rubber② is tightly
pressed by the safety switch③, and then fasten the
screw④.
12
Fixing Bolt
Hinge Rubber
①
Hinge
①
①
②
[Figure 4]
Fixing Bolt
①
[Figure 5]
④
③
[Figure 6]