Table of Contents
Advertisement
MOUNTING AND CONNECTING THE DEVICE
On-Camera or Bracket
The Vello FreeWave Stryker
has a cold-shoe foot on the
bottom of the unit. To mount
the device to a camera or
bracket, simply slide the shoe
mount foot into a shoe-mount.
Tighten the foot's locking
ring to secure the device.
Then connect the included
shutter cable to the Stryker
and camera ports [
].
On a Light Stand
The Vello FreeWave Stryker
has a 1/4"-20 threaded socket
on the unit's cold-shoe foot.
To secure the device to a
light stand, simply screw it
onto a compatible threaded
post by turning it clockwise.
Rotate the device until secure.
Then connect the included
shutter cable to the Stryker
and camera ports [
].
9
Advertisement
Table of Contents
