Philips HDRW720 Service Manual page 70

EN 70 5. HDRW720/0x, DVDR725H/0x
Nucleus Name
Nucleus Number
Description
User Input
Example
Electronic Program Guide Board (EPGB)
Nucleus Name
Nucleus Number
Description
User Input
Example
PCMCIA INTERFACE (PCMCIA)
Nucleus Name
Nucleus Number
Description
Example
Nucleus Name
Nucleus Number
Description
Example
Nucleus Name
Nucleus Number
Description
Example
Nucleus Name
Nucleus Number
Description
Example
Diagnostic Software
DS_SYS_SettingsDoubleCheck
1233
This nucleus sets the HW-Id in the HW-diversity string
- <HW-ID> - The hardware ID to set
-No input - The user will be asked for the ID
DS:> 1232
Enter the new HW ID of the digital board (Currently equals 21)
Enter a value between 0 and 99:
> 22
The HW ID will be set to: 22. Is that correct? ([Y/N]):y
123200:
Test OK @
DS:> 1232
Enter the new HW ID of the digital board (Currently equals 22)
Enter a value between 0 and 99:
>
The HW ID will be set to: 0. Is that correct? ([Y/N]):N
123202: Setting the HW ID was aborted by the user.
Error @
DS:> 1232 99
123200:
Test OK @
DS_EPGB_VersionGet
1300
Returns the version of the EPG board.
None
DS:> 1300
130000:
Version : 6.1.9
Test OK @
DS_PCMCIA_Reset
1400
Reset the PCMCIA device by sending a reset command through IDE
DS:> 1400
140000:
Test OK @
DS_PCMCIA_Inquiry
1401
Get the vendor- and product identification and the product revision level of the media
in the slot.
DS:> 1401
140100:
Test OK @
DS_PCMCIA_WriteRead
1402
Perform a Write Read test to a random sector on the inserted medium in the
PCMCIA device and check if the data read is equal to the data written.
DS:> 1402
140200:
Test OK @
DS_PCMCIA_Diagnostics
1403
Shall perform the internal diagnostic tests implemented by the PCMCIA slot. The
electronics of the PCMCIA slot are tested here, not the inserted medium.
DS:> 1403
140300:
Test OK @