Philips HDRW720 Service Manual page 67

Example DS:> 1215 cvbs ntsc
121500:
Test OK @
DS:> 1215 cvbs pal
121508: The VideoInputProcessor cannot detect a sync-signal.
Error @
DS:> 1215 yuv ntsc
121511:
Error in luminance signal(Y)
Error in chrominance signal(U)
Error in chrominance signal(V)
Error @
Nucleus Name DS_SYS_AudioLoop
Nucleus Number 1216
Description The user first needs to select how the audio path must be routed on the analogue
board (FRS_DS_ANAB_AUDIO_VIDEO_ROUTING) and/or digital board before
calling this nucleus. The user also has to route the audio outputs back to the inputs
by means of cables. In this nucleus the Chrysalis generates an audio sine signal
with a specific signature and sends it to the output of the digital board
(FRS_DS_CHR_SINE). The Chrysalis encodes the audio signal to MPEG I layer II
and after this the signature of the signal will be checked.
User Input None
Example DS:> 1216 121600: Test OK @
Nucleus Name DS_SYS_SlashVersionSet
Nucleus Number 1217
Description Set the slash version of the system
User Input The slash version
Example DS:> 1217
82121700:
Test OK @
Nucleus Name DS_SYS_SlashVersionGet
Nucleus Number 1218
Description Get the slash version of the system
User Input None
Example DS:> 1218
121800: The slash version is: 82
Test OK @
Nucleus Name DS_SYS_Virginize
Nucleus Number 1219
Description (Re-) Virginize the recorder. User data in the NVRAM of the analogue board is
cleared
Example DS:> 1219
121900:
Test OK @
Nucleus Name DS_SYS_VirginModeOn
Nucleus Number 1220
Description Turn on the virgin mode functionality (e.g. the auto channel search upon start-up)
User Input None
Example DS:> 1220
122000:
Test OK @
Nucleus Name DS_SYS_VirginModeOff
Nucleus Number 1221
Description Turn off the virgin mode functionality (e.g. the auto channel search upon start-up)
User Input None
Example DS:> 1221
122100:
Test OK @
Diagnostic Software HDRW720/0x, DVDR725H/0x 5. EN 67