Philips HDRW720 Service Manual page 17

General information
Your DVD Recorder is equipped with the GUIDE Plus+ ® System. The
GUIDE Plus+ ® System offers a free interactive electronic programme
guide that lists all the TV programmes available in your area. You can
also use the GUIDE Plus+ ® System to program your DVD recorder to
record your favourite shows.
Press GUIDE/TV to see a summary of all the TV programmes
currently being shown on the various TV channels. For the summary,
you can either display all shows for a particular start time or sorted
according to category.
For the GUIDE Plus+ ® System to operate correctly, it is necessary for
the DVD recorder to collect the necessary data. The DVD recorder
may take up to 24 hours to do this.
Please note the following:
•) All the TV channels must already have been installed.
•) The TV channel that transmits the GUIDE Plus+ ® system information
must be installed.
If you did not find your country in this list, no TV channel will be
®
provided the GUIDE Plus+ system information.
On the internet page http://www.europe.guideplus.com you will find
further informations and tips.
Country/City (Language) TV channel
Deutschland Eurosport
Österreich Eurosport
Schweiz (Deutsch) Eurosport
United Kingdom ITV
France Canal+
España Tele 5
Nederland Eurosport
Eindhoven Music Factory (TMF)
Rotterdam Music Factory (TMF)
Amsterdam Music Factory (TMF)
Belgique (Français) Canal+
België (Nederlands) Music Factory (TMF)
•)The time and date must have been set.
•)The country and the local post code must have been set in
the GUIDE Plus+ ® system .
•)The aerial/cable network must be connected; it must be possible to
receive TV channels.
•)The DVD recorder must be connected to the mains
•)The DVD recorder must be switched to standby with the
STANDBY m button.
•) If you have connected an external receiver (satellite receiver, set-top
box, cable TV box,...), it must be switched on and tuned to the right TV
channel (see table above).
The GUIDE Plus+® System
®
Setting up the GUIDE Plus+ System
Below we'll tell you how to set up the GUIDE Plus+ ® System to suit
your own particular needs and how to install the external receiver
(satellite receiver, .....) if you have one.
1 Switch on the TV set. If required, select the programme number
for the DVD recorder.
2 Press the GUIDE/TV button on the remote control.
P
The 'Grid' screen will appear.
If the GUIDE Plus+ ® system has not been installed yet, the
'Setup' screen will appear and you can start with the
installation right now.
O If an 'Installlation-screen' appears, select the settings described
in the next chapter and follow the instructions on the screen.
3 Press A . Select the setting 'Setup' with C . This setting is
located on the second menu page.
Home
Setup your system to receive GUIDE Plus+ data.
Schedule Info Editor Setup
Setup
View Demo
4 Select one of the following options using B or A and confirm
with OK .
O
'Setup'
®
Installation of the GUIDE Plus+ system.
Continue reading in the next chapter.
O 'View Demo'
At this point you will be introduced to the functions of the
GUIDE Plus+ ® system. This will be done using stored demo
data.
If you start the demo, programmed recordings can be deleted.
By pressing OK during the presentation, you can proceed
directly to the installation of the GUIDE Plus+ ® system. Read
the next section.
29
The GUIDE Plus+® System
'Setup'
Setup Home
Press Aor Bto select. Then press OK to confirm.
Setup
Choose item to set up :
Language English
Country United Kingdom
Postal code XXXXX
External receiver 1 None
External receiver 2 None
External receiver 3 None
Check the data displayed on the screen. If necessary, you can change
these. To do so, select the corresponding line with B or A .
'Language'
Here you can change the language for the on-screen menu.
1 Press OK .
2 Select the desired language using B or A and confirm with
OK .
3 Press OK to return to the 'Setup' screen.
'Country'
Select the country you currently live from the list. The DVD recorder
needs this information to load the right channel list.
1 Press OK .
2 Select the country you live in using B or A and confirm with
OK .
3 Press OK to return to the 'Setup' screen.
'Postal code'
In order to adjust the GUIDE Plus+ ® system correctly, it is necessary
to know your current location with the TV channels available. Using
the local post code and the country, the DVD recorder can
automatically make the settings.
1 Press OK .
2 Choose the entry position using C , D . Select the local post
code of your location using A , B , or the number buttons
0..9 .
O
Depending on the country you select, you can also enter
letters using B or A .
a I cannot enter a local post code
b You have selected a country in which none of the channels transmits
GUIDE Plus+ ® data yet.
3 Confirm the local post code with OK .
4 Press OK to return to the 'Setup' screen.
30
'External receiver 1'
O How you install the external receiver you will read in the next
chapter.
O If you have no external receiver connected, read the section
'Finalise set-up'.
Installation of the 'External receiver 1'
Setup Home
Press Aor Bto select. Then press OK to confirm.
Setup
Choose item to set up :
Language English
Country United Kingdom
Postal code XXXXX
External receiver 1 None
External receiver 2 None
External receiver 3 None
If you have connected an external receiver (satellite receiver, set-top
box, cable TV box), you must also install it in the GUIDE Plus+ ®
system. TV programmes (TV channels) that you can only watch via the
®
receiver can also be displayed in the GUIDE Plus+ system and be
programmed for recording.
You can connect up to three external receivers to the DVD-Recorder.
1 Select with B or A in the 'Setup'screen the line 'External
receiver 1' and confirm with OK .
2 Read the information on the screen and confirm with OK .
3 Select the type of the external receiver. This setting serves to
preselect the type used.
Which types can I choose?
This selection depends on the country and the GUIDE Plus+ ® system
provider. Therefore, some types may have no function.
'Cable': Cable receiver, cable box.
'Satellite': Analogue or digital satellite receiver.
'Terrestrial': Digital terrestrial decoder box.
'None': No external device connected.
4 Confirm with OK .
If you selected 'None', there is nothing further you need to do
here. Read on in the section entitled 'Continue set-up'.
Otherwise, you should continue here.
5 Select your provider from the list.
If you do not have a provider, select 'No provider'
O
6 Confirm with OK .
7 Select the brand of your external receiver from the list. If,
additionally your provider is printed on your receiver (e.g. Sky,...),
you must choose the provider as brand.
O
Depending on the type and provider you selected, a limited
selection will appear.