2
Figure 4-12
4.1.6
Basic Engine
–
Remove the tray front
–
Remove the 4 screws that fix the drive, see figure 4-13, and
pull out the drive
Figure 4-13
4.1.7
Analog Board
–
Remove the 3 screws (1) that fix the back plate to the
bottom plate, see figure 4-14
–
Remove the Fan assy by releasing the fixing screws (2)
–
Remove the 3 screws (3) fixing the Analog Board to the
bottom plate
–
Remove the 2 screws fixing the hard disc module (4), see
figure 4-15
–
Remove screw safety holder (5)
–
Unlock the two snaps hooks at the left and right (6), see
figure 4-16, and pull the board and backplate out gently (7)
–
Turn the PCB in the service position (8), see figure 4-17
3
1
1
Figure 4-14
Mechanical Instructions
3
3
2
1
2
HDRW720/0x, DVDR725H/0x
4
5
Figure 4-15
6
Figure 4-16
8
Figure 4-17
4.
EN 41
4
6
7