Philips HDRW720 Service Manual page 35

O 'On':
Direct Record is activated.
O 'Off':
Direct Record is deactivated.
'Filter'
Here you can choose between:
O 'Sport':
Picture quality is optimised for rapid movements in the
recording modes (picture qualities) M3 to M8.
Please observe that this setting will reduce the overall
impression of the picture quality.
O 'Normal':
Better overall picture quality.
Please observe that this setting may cause picture artefacts
(MPEG artefacts) to appear in rapid movements.
I can not select this function
Check the actual record mode selected. This function is available in the
record modes 'M3' to 'M8' only.
'Safety Slot'
Here you can enter a time (one to five minutes) when a programmed
recording (Timer) should start earlier and end later.This is necessary if
®
the information from the GUIDE Plus+ system about the starttime
were sent too late or too early
'Set up'
'System'
In this menu, you can select one of the following features:
'Auto delete'
If there is no space for new recordings on the HDD, you can
determine here whether recordings will be automatically deleted or
not. You can see the titles and the sequence according to which they
will be deleted in the 'Delete Order' setting in the media browser. For
more information, read the chapter 'The Media Browser'.
O
'On': Recordings will be automatically deleted in the following
order:
1) Titles that have already been viewed. Symbol 'Symb seen'.
2) Titles that were not protected. No symbol 'Symb protect'
available.
O 'Off': No recordings will be automatically deleted.
'Jump forward'
Set the time you want to jump forward when you press JUMP
FWD in the time shift buffer.
User preferences for the HDD
'Jump back'
Set the time you want to jump backward when you press JUMP
BACK in the time shift buffer.
Use the setting 5 minutes for Jump forwardand 1 minute for
'Jump back', to make it easy to skip unwanted scenes.
'Installation'
Please observe that for selection of function in this menu the Time shift
Buffer will be flushed. If the 'Time Shift Buffer ' contains important
recordings, save them with the REC/OTR n button first. Read
additional information about the 'Time Shift Buffer' in the chapter 'The
Time Shift Buffer'.
O 'Autom. search':
Automatic channel search
'Follow TV':
O
Sorting TV channels automatically
O 'Manual search':
Manual TV channel search
O 'Sort TV channels':
Sorting TV channels manually
O 'Time/Date':
Setting/Correcting the time and date
For more information, please read chapter 'Installing your DVD
recorder'.
'Flush Buffer'
Using this function, you can store recordings on the HDD that were
marked for recording in the time shift buffer. Recordings that were not
marked will be deleted.
O 'Yes':
Recordings will be stored
O
'No':
This interrupts the process
69
Additional user preferences
This section describes how you can make additional personal settings.
The symbols have the following meaning:
t
Picture settings
v
Sound settings
u
Language settings
w
Additional settings
s
Disc settings
z
Record settings
y
Installation
Preparation:
•) The TV set is switched on, and if necessary, the programme number for
the DVD recorder has been selected.
•) the DVD recorder is switched on.
1 Press the DISC MENU button and then the SYSTEM
MENU button on the remote control.
P
The menubar appears.
A
2 Select ' ' using D oder C and confirm with
3 Select the corresponding function using B or A and confirm
with C .
4 Select the corresponding line using B or A and confirm with
C . For more information on each function, read the following
pages.
5 Select the corresponding function using B or A , or the setting
with D or C . Select the functions you want to change as
described in the following pages.
6 Confirm the new setting with OK .
7 Close the menu item with D .
Picture settings
You can select the following functions in this menu:
Picture
TV shape 16:9
Black level shift Off
Video shift ï
Video output RGB + CVBS
70
'TV shape'
The picture signal from your DVD recorder can be set to match your
TV set:
O '4:3 letterbox'
for a widescreen picture with black bars at the top and
bottom
O '4:3 panscan'
for a full-height picture with the sides trimmed.
O
'16:9'
for a widescreen TV set (16:9 screen ratio)
'Black level shift'
Adapts the colour dynamics for NTSC playback when switched to 'On'
'Video shift'
Use this feature to adjust the position of the picture on your TV left or
right using D , C to suit the screen of your TV set.
'Video output'
Since RGB and S-VIDEO signals sometimes use the same connections
on a scart cable, the two signals cannot be transmitted simultaneously.
With these settings, you can decide whether RGB or S-VIDEO signals
are to be transmitted. This setting affects only the scart sockets of the
DVD recorder ( EXT1 TO TV-I/O output socket and EXT2
AUX-I/O input socket).
Please also observe which signals are available at which scart socket of
the TV set or how the scart sockets need to be switched.
If necessary, consult the instruction manual of your TV set.
'RGB + CVBS'
O
Depending on the TV set you are using, switching between the
'RGB' and the 'Video(CVBS/FBAS)' signal is done automatically.
If the picture scrolls to the side or colour quality problems
appear on some TV sets when the setting is 'RGB + CVBS',
you must select 'CVBS only'.
O 'S-video only'
Only the S-Video signal will be processed at both scart sockets
( EXT1 TO TV-I/O output socket and EXT2 AUX-I/O input
socket).
In case the scart socket of the TV set is not suitable for
S-VIDEO (Y/C) signals, you will only see a black&white
picture, although the recording will be made in colour.
Moreover, only the video (CVBS, FBAS) signal will be used for
recordings via the EXT1 TO TV-I/O scart socket.
Please observe that when making recordings from a video
recorder that transmits only video (CVBS/FBAS) signals
through the scart cable, recordings via scart socket EXT2
AUX-I/O may be made in black and white.
Therefore, use this setting with caution.
'CVBS only'
O
Only the video (CVBS/FBAS) signal is transmitted, regardless
of the video signals (RGB, Y/C) at the scart sockets. This
setting is selected automatically when no 'RGB' or 'S-VIDEO'
signal is detected at the scart socket.
When selecting the settings 'S-video only' or 'CVBS only', the RGB
signal is switched off.