Philips HDRW720 Service Manual page 61
Hard disc/dvd-video recorder
Hide thumbs
Also See for HDRW720:
- Specifications (3 pages) ,
- Owner's manual (90 pages) ,
- Software upgrade instructions (12 pages)
Advertisement
2
Input signal is from REAR VIDEO(CVBS) IN and will be routed to the digital board.
3
Input signal is from FRONT S-VIDEO(Y/C) IN and the signal received will be routed to the
digital board.
4
Input signal is from REAR S-VIDEO(Y/C) IN and will be routed to the digital board.
5
No Routing.
6
No routing.
7
No routing.
8
Input signal is VIDEO(CVBS) from TUNER and will be routed to Y Pin of Rear Y/C
Connector.This will give only black/White Picture .
9
Input signal is from YUV IN and will be routed to YUV OUT.This is possible only if Digital
Board routes back YUV signal received back to the Analogue board(DENC)
10
No routing.
11
No routing.
12
No Routing.
13
No Routing.
14
No Routing.
15
Input CVBS Signal from Tuner is routed to Digital Board..
16
No Routing.
17
No Routing.
18
Input Signal from CVBS Rear In is routed to Digital Board. This is the same as path ID 02.
19
Input Y/C signal from Digital Board is routed to Y/C Rear Out Connector and Input signal from
Y/C Front In Connector is routed to Y/C Digital Board.
20
Y/C signal from Digital Board is routed to Y/C Rear Out Connector and Input signal from Y/
C Rear In Connector is routed to Y/C Digital Board.
23
The Video signal received from the Digital board will be output on Modulator channel 3.
24
The Video signal received from the Digital board will be output on Modulator channel 4.
Nucleus Name
DS_ANAB_AudioRouting
Nucleus Number
1113
Description
Perform the routing of the audio paths on the analogue board
User Input
The user has to input the correct parameter for the routing (see table 'audio routing'
below)
Example
DS:> 1113
00111300:
Test OK @
Audio routing paths (Europe)
Path ID
Description
0
Input signal is from FRONT AUDIO IN and will be routed to the digital board.
1
Input signal is from FRONT AUDIO IN and will be routed to the digital board.
2
No Routing.
3
Input signal is AUDIO from SCART1 and will be routed to the digital board.
4
Input signal is AUDIO from SCART2 and will be routed to the digital board.
5
No routing.
6
No routing.
7
Input Audio signal is from the digital Board and it will be routed to the SCART1 and SCART2
8
Input AUDIO signal from TUNER and will be routed to SCART2.
9
Input signal is AUDIO from SCART1 and will be routed to SCART2.
10
Input audio signal from SCART2 is routed to SCART1.
11
Input Audio signal is routed from DVIO to SCART2.
12
13
No Routing.
14
Input is Audio Signal from DVIO and it will be routed to Digital Board.
15
Input is Audio Signal from TUNER and it will be routed to Digital Board..
16
No routing.
17
No Routing.
18
Input signal is from FRONT AUDIO IN and will be routed to SCART2.
21
Input signal is from FRONT AUDIO IN and will be routed to the digital board.
Audio routing paths (NAFTA)
Path ID
Description
0
No Routing.
1
Input signal is from FRONT AUDIO IN and will be routed to the digital board.
2
Input signal is from REAR AUDIO IN 2 and will be routed to the digital board.
Diagnostic Software
HDRW720/0x, DVDR725H/0x
5.
EN 61
Advertisement
