Table of Contents
Advertisement
FUNCTION BUTTON
PRESS TO HAVE HANDGRIP HEART RATE FIGURES DISPLAY ON THE MONITOR.
FUNCTION
PULSE THE MONITOR WILL DISPLAY THE USER'S HEART RATE WHILE EXERICING. YOU WILL SEE YOUR
CURRENT HEART RATE (BPM) DISPLAY ON THE LCD DURING EXERCISING. WHEN YOU START TO
EXERCISE,YOU HAVE TO HOLD ON GRIPS WITH BOTH HANDS,AFTER 30 SECONDS TO MAX. 1
MINUTE,THE PULSE FIGURE WILL DISPLAY ON THE LCD. IF YOU HOLD ON THE GRIP WITH ONE HAND
ONLY, THE PULSE FIGURE DISPLAY WILL BECOME UNSTABLE. FOR THE PULSE READOUT ACCURACY
REASON, WE'LL SUGGEST YOU TO HOLD ON BOTH HANDS DURING EXERCISING. YOU MAY ALSO
PRESET TARGET PULSE TO ASSIST TRAINING. AS SOON AS YOUR CURRENT HEART RATE IS EXCEED
THE TARGET FIGURE, THE MONITOR STARTS TO ALARM TO REMIND THE USER.
NOTE
5.
WHEN THERE IS NO SIGNAL BEEN TRANSFERRED INTO THE MONITOR FOR 4 MINUTES, THE MONITOR
DISPLAY WILL SHUT OFF AUTOMATICALLY.
6.
IF IMPROPER DISPLAY ON MONITER, PLEASE RE-INSTALL BATTERIES TO HAVE A GOOD RESULT.
7.
THE MONITOR REQUIRES 2 PCS OF 1.5V AAA SIZE OR UM-3 BATTERIES.
BATTERIES SHOULD BE REMOVED FORM THE DEVICE IF NOT USED FOR PROLONGED
8.
PERIODS. ALWAYS CHANGE BOTH BATTERIES AT THE SAME TIME.
Advertisement
Table of Contents
