Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
STEP 1
Connect the rower frame (pt.1) to the rear
stabilizer (pt.7) using the bracket provided,
slot the fixing bolt (φ9.5*115) (pt.6) through
the bracket and lock in place using the
washer (pt.25) and (M6*10) Bolt (pt.24).
STEP 3
Connect upper wire (pt.34) with Computer
(pt.12) then attach computer to the Main
Frame (pt.45).
STEP 2
Attach the seat bracket (pt.4) to the
underside of the seat (pt.3) using the four
Washer (φ8) (pt.22) and Screw (M8*15)
(pt.23).
STEP 4
Attach the front stabilizer (pt.46) to the
underside of the Main Frame (pt.45) using
the two Carriage Bolt (M8*50) (pt.47),
Curved Washer (φ8) (pt.44) and S Nut (M8)
(pt.14).
Advertisement
Table of Contents
