Cleaning; Cleaning Procedures - Sekonic SR-3500 Operating Manual

Cleaning

Dirty rollers, reading lenses, and sensors can cause various operational errors. Clean them
regularly using the following procedures. Cleaning intervals differ depending on usage
conditions (usage frequency, quality of paper used, etc.) Cleaning periods are for your
reference -- clean the device soon if you notice dirt or other irregularities.
● WHEN CLEANING THE DEVICE ,
DO NOT SPRAY ANY MATERIALS CONTAINING AN INFLAMMABLE GAS OR
LIQUID AND BE SURE TO KEEP THIS KIND OF MATERIALS AWAY FROM THIS
DEVICE.
Use a cleaning cloth with suitable amount of cleaning liquid to wipe off well, after
removing the power plug from the outlet and the device becomes to cool off.
● WHEN CLEANING THE DEVICE ,
BE SURE TO REMOVE THE POWER PLUG FROM THE OUTLET.
There is a threat that a fire or an electric shock cause the unexpected accident.

■ Cleaning procedures

Main body unit
1.
Turn the power off and remove the power cord
from the outlet.
2.
Grasp the lock lever to release the lock, and
push the top cover up to open it.
3.
The screw of a right figure arrow is loosened,
a stopper is slid rightward, and it is made a
release position. Top cover comes to open
greatly.
Caution)
If you do not remove the stopper, you may
damage the product.
4.
Clean necessary parts.
5.
After cleaning slides a stopper leftward and
tightens a screw.
Warning)
If a stopper is not returned to the original
position, fingers and other body parts could
be pinched and injured by the back hinge.by
the back hinge.
6.
Close the top cover.
Slowly close the top cover and press it until
there is a click sound that indicates it is
locked.
Warning
Cleaning
Stopper
Screw
-95-