Sekonic SR-3500 Operating Manual page 83

1.
Printing after reading marks
The printable area is a maximum of 230mm from the bottom edge of a sheet.
[When sheet size is (L > 233)mm]
[When sheet size is (L < 233)mm]
2.
Printing while reading marks at the same time
The overall area can be printed regardless of the sheet size.
※ 1:The number of characters until it stops being printed dpend on working condition.
※ 2:The size of printable area depends on the size of the sheet used.
Options Printrer unit ■ Printable area
2mm (W-4) mm 2mm
2mm (W-4) mm 2mm
2mm (W-4) mm 2mm
(L-230) mm
(230-3) mm
3mm
3mm
(L-6) mm
3mm
3mm
(L-6) mm
3mm
-83-