Sekonic SR-3500 Operating Manual page 110

Error displays and countermeasures
(2) Transmission errors
Command error
Parameter error
Protocol error
* All data that OMR receives while a transmission error occurs will be invalid.
(3) Cover open errors
Cover open
Stacker unit cover open
* When the cover is closed, errors and warnings other than hardware
errors will be cancelled.
(4) Jam errors
[Main body unit]
No feed
Jam at paper-feeding
detection sensor
Jam at reading start
detection sensor
Jam at main body unit
paper discharge
detection sensor
-110-
Error Explanation
A non-specified command code
was received.
A non-specified parameter was
received.
While processing a command,
another command was received.
Error Explanation
The cover of the main body unit
is open
Front door of the stacker unit is
open.
Error Explanation
Paper is not feeding though
paper-feeding operation has
started.
A paper jam occurred at the
paper-feeding detection sensor.
A paper jam occurred at the
reading start detection sensor.
A paper jam occurred at the
main body unit paper discharge
detection sensor.
Code Solution
Press the CLEAR switch
F4
(or execute the clear error command).
Press the CLEAR switch
F5
(or execute the clear error command).
Press the CLEAR switch
F6
(or execute the clear error command).
Code Solution
Check if the cover of the main
G1
body unit is closed.
C l o s e t h e f r o n t d o o r o f t h e
G2
stacker unit.
Code Solution
• Reset paper.
• Press the CLEAR switch
H1
( o r e x e c u t e t h e c l e a r e r r o r
command).
• Remove jammed paper.
• Press the CLEAR switch
H2
( o r e x e c u t e t h e c l e a r e r r o r
command).
• Remove jammed paper.
• Press the CLEAR switch
H3
( o r e x e c u t e t h e c l e a r e r r o r
command).
• Remove jammed paper.
• Press the CLEAR switch
H4
( o r e x e c u t e t h e c l e a r e r r o r
command).