Character Interval Setting - Sekonic SR-3500 Operating Manual

3.

Character interval setting

The space between printed characters can be increased between 0 to 99
pixels. The actual character interval (in mm units) is determined by the "size,"
"magnification," and "interval" settings.
Character interval (b) = character interval increment x (magnification + interval + 1)
No. Size
1 3.2mm
2 4.0mm
3 4.8mm
4 5.6mm
5 6.4mm
MENU
(1) Press the
UP
(2) Use the
and press the
UP
(3) Use the
and press the
*
(" " mark flashes in the first column of the first line on the LCD.)
UP
(4) Use the
FEED/ENTER
(5) Press the
(The flashing "
(6) Keep pressing the
or press the
Printer settings ■ SR-600,SR-9000 mode
character interval increment
0.4mm
0.5mm
0.6mm
0.7mm
0.8mm
switch to enter the menu mode.
DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
DOWN
and switches to select [Character Pitch] setting,
FEED/ENTER
switch.
DOWN
and switches to set the value.
switch to save the setting value into memory.
*
" mark disappears from the LCD.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
b
Character pitch
setting values
0 - 99 (Dots)
-57-