Stacker Settings - Sekonic SR-3500 Operating Manual

Stacker settings

Stacker settings
You can set the paper discharge direction in SR-600/SR-9000 mode.
1.
MENU
Press the
2.
UP
Use the and
and press the
3.
Select [Go Out Direction] setting and press the
*
(" " mark flashes in the first column of the first line on the LCD.)
4.
UP
Use the and
5.
FEED/ENTER
Press the
(The flashing "
6.
Keep pressing the
or press the
-50-
(when stacker unit is installed)
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
switches to set the value.
switch to save the setting value into memory.
*
" mark disappears from the LCD.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
FEED/ENTER
switch.
Stacker go out direction
setting values
• Main • Select