Barcode Reading Position Adjustment - Sekonic SR-3500 Operating Manual

Barcode unit / V • barcode unit / H ■ Barcode reading position adjustment

■ Barcode reading position adjustment

1.
Turn the power off.
2.
Remove the carrier cover.
3.
Loosen the barcode unit position fixing screw, move the barcode unit according
to barcode position, and tighten the screw to secure it.
* The scale on the positioning sticker indicates center of the barcode position
from the edge of the paper(Timing mark side). The barcode position is determined
by aligning the barcode unit position fixing screw with the scale on the sticker.
4.
Turn the power on.
-92-
Carrier cover
Positioning sticker
Positioning screw
Barcode unit