Printer Unit; Printer Unit Specifications - Sekonic SR-3500 Operating Manual

Options Printrer unit ■ Printrer unit specifications
Printrer unit
Printrer unit is a optional equipment with SR-3500.

■ Printer unit specifications

Printing location
Printing method
Number of
characters printed
Kinds of
characters printed
Character size
Character interval
Printing pixels
Printing position
Printing position adjustment
■ Pritable area
Please note the printable area differs depending on the printing
method.
The printable area is indicated in
depending on the size of the sheet used.
Note)
If a sheet is curled, it may cause a paper
jam, so please do not use curly sheet.
-82-
Prints on top surface of fed sheet
Inkjet
Maximum 72 characters
Alphabet (uppercase and lowercase letters)
Numbers (0 - 9)
( !"#$%&'()*+,-./:;<=>?@［¥］^_ ■｛SP｝〜〇△□Х )
36 Symbols
Japanese kana (including half and full accents,
Height approximately 3mm x width approximately 3.2mm - 96.0mm
Approximately 0.8mm - 92mm
12 vertical x 9 horizontal pixels
2mm or more from standard paper feeding edge to beginning of characters
2mm or more from right edge of maximum size sheet to beginning of characters
Main scanning direction: Adjust head position manually.
Sub scanning direction: Set print starting position command.
Main scanning direction
Feeding direction
Ink cartridge
of the following figure
※ 2
。 「」 、 ・ー
)
Expires: 6 months after opening
Life: about 1 million characters
W
Sheet size
※
1
L