Character Size Setting - Sekonic SR-3500 Operating Manual

Printer settings ■ SR-3500,SR-6500 mode
SR-3500,SR-6500 mode
Character size setting ................................................... P.52
Character interval setting .............................................. P.53
• See P.54 and subsequent pages for SR-3500,SR-6500 mode.
SR-600,SR-9000 mode
Character size setting ................................................... P.55
Character magnification setting .................................... P.56
Character interval setting .............................................. P.57
• See P.57 and subsequent pages for SR-600,SR-9000 mode.
■ SR-3500,SR-6500 mode
1.

Character size setting

The width of a character can be increased in 0.8mm increments between 3.2mm
and 96.0mm.
No.
1
2
3
115
116
117
(1) Press the
(2) Use the
and press the
(3) Use the
and press the
*
(" " mark flashes in the first column of the first line on the LCD.)
-52-
Size (a)
3.2mm
4.0mm
4.8mm
94.4mm
95.2mm
96.0mm
MENU
switch to enter the menu mode.
UP DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
UP DOWN
and switches to select [Size] setting,
FEED/ENTER
switch.
About 3mm
a