Low Power Consumption Settings; Sleep Duration - Sekonic SR-3500 Operating Manual

Low power consumption settings ■ Sleep duration

Low power consumption settings

This device can be set to reduce power consumption in standby mode.
The low-power consumption settings make the device automatically reduce power
consumption when it is not used for a certain period.
Sleep mode = low-power consumption condition that it automatically switches to when it is
not used for a set time (sleep duration).
Standby mode = a second low-power consumption condition that it automatically and
continuously switches to after shifting to the sleep mode when it is not used
for a set time (standby duration).
(Power consumption is reduced further than sleep mode.)

■ Sleep duration

1.
MENU
Press the
2.
UP
Use the and
and press the
3.
UP
Use the and
and press the
*
(" " mark flashes in the first column of the first line on the LCD.)
4.
UP
Use the and
5.
FEED/ENTER
Press the
(The flashing "
6.
Keep pressing the
or press the
-60-
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
switches to select [Time for Power Save] setting,
FEED/ENTER
switch.
DOWN
switches to set the value.
switch to save the setting value into memory.
*
" mark disappears from the LCD.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Time for Power Save
setting values
• None
• 1 - 60 (Minutes)
*Can be set in minute
increments.