Setting Paper Weight - Sekonic SR-3500 Operating Manual

Operation ■ Setting paper weight

■ Setting paper weight

1.
The device is equipped with a function to detect double-feeding (DF) errors.
Conduct [Paper Weight]*1 according to the thickness of the paper to be used.
*1 Setting reading
S e e "Data reading settings ■ setting paper weight" in this manual. P.44
Set the paper weight dial to prevent double feeding.
Paper weight value is for reference only, so adjust it according to the condition of
the paper to be used.
2.
There is a mechanism which adjusts paper interval with the paper weight dial to
prevent double feeding.Adjusts the paper weight dial to the sheet which you use.
Note)
1.Because as for thickness of the sheet there is a variation depending
upon papery quality, increase and decrease with conveying circumstance.
2.When it sets extremely small(narrow), there are case which it becomes
cause of the paper clogging and the sheet skew.
*2 Setting paper weight dial
-28-
(initially set to a paper weight of 105g/m
(initially set to a paper weight of 105g/m2.)
Align the arrow to the paper weight.
2
.)