Sekonic SR-3500 Operating Manual page 77

5.
Loosen the cartridge case fixing screw, move the cartridge case according to the
desired printing position, and tighten the screw to secure it.
* The scale on the positioning sticker indicates the printing position from the edge
of the paper. The printing position is determined by aligning the cartridge case
fixing screw with the scale on the sticker.
6.
If the printing position is properly aligned, install the printer in the stacker unit.
7.
Tighten the printer fixing screw and connect the printer connector.
Fixing screw
Options Stacker unit ■ Printing position adjustment
Fixing screw
Positioning sticker
Cartridge case
Printer
Connector
-77-