Setting Character Code - Sekonic SR-3500 Operating Manual

UP
(4) Use the
FEED/ENTER
(5) Press the
(The flashing "
(6) Keep pressing the
or press the
2-6.

Setting character code

MENU
(1) Press the
UP
(2) Use the
and press the
UP
(3) Use the
and press the
*
(" " mark flashes in the first column of the first line on the LCD.)
UP
(4) Use the
FEED/ENTER
(5) Press the
(The flashing "
(6) Keep pressing the
or press the
Connecting to a computer ■ RS-232C
DOWN
and switches to set the value.
switch to save the setting value into memory.
*
" mark disappears from the LCD.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
switch to enter the menu mode.
DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
DOWN
and switches to select [Character Code] setting,
FEED/ENTER
switch.
DOWN
and switches to set the value.
switch to save the setting value into memory.
*
" mark disappears from the LCD.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Flow control
setting values
• RS/CS • Xon/Xoff
• None
Character code
setting values
• Accept All
• Ignore 4 Codes
I f i g n o r e s o m e i s
selected, the following
codes are ignored.
• 20H • 0AH
• 7FH • 1AH
-37-