Time And Date; User Programmable Feature - NEC P/N 1093099 Feature Handbook

Time and Date

Time and Date
Description
The Time and Date shows on telephone displays and prints on system reports.
The system Time and Date appears on display telephones and Station Message Detail Recording reports.
The system administrator can change the time and date from the system programming mode. In addition,
extension users can change the time and date from the User Programmable Features. Although the data is
entered in 24-hour format, it always displays in 12-hour format (e.g., 1300 = 1:00PM). The system can auto-
matically adjust the time for Daylight Savings Time.
Operation

User Programmable Feature

Feature
Time and Date
160 ◆ Features
Changing the System Time and Date
Mnemonic
#TD (#83)
#TD + Enter time in 24-hour clock using hours (2 digits),
minutes (2 digits) and seconds (2 digits) + HOLD + Enter
date using month (2 digits), day (2 digits) and year (4 dig-
its) + HOLD + SPEAKER to exit.
Operation Access Level
4 and 5
DSX Feature Handbook