NEC P/N 1093099 Feature Handbook page 42

Central Office Calls, Placing
Operation
To place an outside call over a specific line using a line key:
1. Lift handset.
Press line key.
2.
• You hear dial tone on the line you select and the line key lights green.
• To use loop keys for placing calls, see Loop Keys (page 103).
3. Dial outside number.
Placing Outside Calls Using Line Dial-up or Direct Line Access
To place an outside call over a specific line using a Line Dial-up or Direct Line Access:
1. Lift handset.
2. Press INTERCOM .
Do one of the following:
3.
a. For Line Dial-up:
b. For Direct Line Access:
Dial outside number.
3.
• By default, pressing Intercom and dialing 911 or lifting the handset and dialing 911 will not call emergency services.
To place an outside call over a Line Group:
1. Lift handset.
2. Press INTERCOM .
Dial the Line Group code (90-98).
2.
• If you hear dial tone as soon as you dial 9, your system has Line Group Routing enabled. See Line Group
Routing (page 98).
3. Dial outside number.
34 ◆ Features
Placing Outside Calls Using Line Keys
Dial #9 followed by the line number (e.g., 01 for line 1).
• If you hear busy tone, you may be able to dial 2 to queue for the busy line.
Dial 1 plus the line number (e.g., 01 for line 1).
• If you hear busy tone, you may be able to dial 2 to queue for the busy line.
Placing Outside Calls Using Line Groups
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
DSX Feature Handbook