NEC P/N 1093099 Feature Handbook page 43

Using Store and Forward
To place an outside call using Store and Forward:
Do one of the following.
1.
a. Press INTERCOM
• You may optionally be able to dial
b. Press a Switched Loop key + Dial Line Group number (
c. Press Fixed Loop key.
2. Dial the outside telephone number.
When you have finished dialing, wait 6 seconds or dial
3.
• The stored number dials out.
Using Store and Forward and Account Codes
To place an outside call when both Store and Forward and Account Codes are enabled:
• With Forced Account Codes for Toll Calls Only, you do not have to enter an Account Code for local calls. Just dial
the call normally.
1. Do one of the following.
a. Press
INTERCOM
b. Press Switched Loop key + Dial the Line Group number (
c. Press Fixed Loop key.
2. Dial the outside telephone number.
3. Do one of the following.
a. Wait for three beeps (Forced Account Codes only).
b.
[Account Code]
[ACCT]
c. Press your Account Code Feature Key.
4. Enter the Account Code.
5. Do one of the following.
a. Wait 6 seconds.
b. [Account Code]
[ACCT]
c. Press your Account Code Feature Key.
d. Dial #.
DSX Feature Handbook
Feature Name
and dial 9 .
90 - 98
for the call to go though,
#
and dial (or optionally -
9 90
Select Account Code soft key.
Select Account Code soft key.
Central Office Calls, Placing
.
90-98 ).
).
98
90 - 98) .
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Features ◆ 35