NEC P/N 1093099 Feature Handbook page 174

User Programmable Features
To program a feature, press # and the feature's code. For example, to enable incoming Paging, press # and dial V P Y , then
to hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to
SPEAKER
the attendant.
Feature
Ringing Line Preference
Speed Dial, Personal
Speed Dial, System
System Program Access
Time and Date
Intercom Voice Announce
(for incoming Intercom
calls)
Operation
See the Operation heading in the above table.
166 ◆ Features
User Programmable Features
Mnemonic Numeric
#RLP #757
#SP #77
#SP #77
#*#*
#TD #83
#VA #82
Operation
+ Y to enable or N to disable +
#RLP
to exit.
SPEAKER
#SP + Press bin key (for bins 701-710) or dial
the bin key (701-720) + HOLD + Dial outside
line (e.g., 1), Line group (e.g., 90-98), or ICM
for Intercom feature + HOLD + Number to store
+ HOLD twice + Name + HOLD + Press another
bin key or SPEAKER to exit.
+ Dial System Speed Dial bin number
#SP
(e.g., 201) + HOLD + Dial outside line (e.g., 1),
Line group (e.g., 90-98), or INTERCOM for
Intercom feature + HOLD + Number to store +
twice + Name + HOLD + Dial another
HOLD
System Speed Dial bin or SPEAKER to exit.
#*#* + Enter programming password
+ Enter time in 24-hour clock using hours
#TD
(2 digits), minutes (2 digits) and seconds (2 dig-
its) + HOLD + Enter date using month (2 digits),
day (2 digits) and year (4 digits) + HOLD +
to exit.
SPEAKER
#VA + V for voice announce or R for ring +
SPEAKER to exit.
Access Level
2-5
1-5
4 and 5
3-5
4 and 5
3-5
DSX Feature Handbook