Child Lock Function - Electrolux LAVATHERM 56740 User Manual

16 Daily use
2. Press the DELAY STARTUITSTEL but-
ton as many times as necessary until
the required start delay appears on
the display, e.g. 12h if the programme
is to be started in 12 hours.
If the display is showing 20h and you
press the button again, the time delay
will be cancelled. The display will
show 0' and then the duration of the
selected programme.
3. To activate the delay timer, press the START PAUSE START PAUZE button. The
amount of time remaining until the programme is set to start is continuously
displayed (e.g. 15h, 14h, 13h, ... 30' etc).
The delay time icon

CHILD LOCK function

The child lock can be set to prevent a programme being accidentally started or a
programme in operation being accidentally changed. The child lock function locks
all buttons and the programme knob. The child lock can be activated or deactivated
by holding down the BUZZER ZOEMER and TIME TIJD PROGR. buttons
simultaneously for 5 seconds.
– Before programme is started: Appliance cannot be used
– After programme is started: Programme in operation cannot be changed
The icon appears in the display to indicate that the child safety device is
activated.
The child safety device is not deactivated once the programme comes to an end.
If you want to set a new programme, you must first deactivate the child safety
device.
is on.