Using The Block Recognizer - Symbol PDT 8100 Series Product Reference Manual

PDT 8100 Series with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide

Using the Block Recognizer

To use Block Recognizer:
1. Tap the arrow next to the Input Panel button, then Block Recognizer.
2. Write a letter in the left side of the box, or a number in the right side, using special
character strokes.
When a letter is written, it is converted to typed text on the screen. For specific instructions
on using Block Recognizer, with Block Recognizer open, tap the question mark next to the
writing area, or see
Using the Letter Recognizer
To use Letter Recognizer:
1. Tap the arrow next to the Input Panel button, then Letter Recognizer.
2. Write letters or numbers in the writing area, just as you would on paper. Write
capital letters in the left side of the box, numbers in the right side, and lower case
letters in the center.
When a letter is written, it is converted to typed text on the screen. For instructions on using
Letter Recognizer, with Letter Recognizer open, tap the question mark next to the writing
area.
2-22
Figure 2-13. Block Recognizer
Appendix A, Block Recognizer Characters.
Figure 2-14. Letter Recognizer