Ip Config Tab - Symbol PDT 8100 Series Product Reference Manual

Field
Shared Encryption
Key

IP Config Tab

Use the IP Config tab to configure the following terminal profile network address
parameters: IP address, subnet, gateway, DNS and WINS.
Figure 9-5. Spectrum24 FH Settings - IP Config Tab
Field
IP Configuration
Table 9-4. Encryption Tab Fields (Continued)
Use the Shared Encryption Key option to enable 40-bit Encryption. Select the
Encryption Index key radio button (to be used for the terminal) and enter 10
hex digits for each key used. Tap ok to save and implement the encryption
key data.
Select an Encryption Index key radio button and tap Reset Keys to clear the
entries in the Shared Encryption Key fields.
DHCP
Table 9-5. IP Config Tab Fields
Select Dynamic Host Configuration Protocol (DHCP) from the IP Type drop-
down list to obtain a leased IP address and network configuration information
from a remote server. DHCP is the default setting for the terminal profile.
When DHCP is selected, the IP address fields are read-only.
Select Static to manually assign the IP, subnet mask, default gateway, DNS
and WINS addresses used by the terminal profile.
Spectrum24 Network Configuration
Description
Static
Description
9-9