Configuring The Pdt 8142 (2 Mb Radio); Spectrum24 Fh Settings - Symbol PDT 8100 Series Product Reference Manual

PDT 8100 Series with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide

Configuring the PDT 8142 (2 MB Radio)

Spectrum24 FH Settings

The Spectrum24 FH Settings tabs are used to configure the terminal's 2 MB wireless
network settings for frequency hopping. Tap Start - Settings -System tab - Spectrum24 FH
Settings icon to display the Symbol Spectrum24 FH settings window.
Table 9-1. Spectrum24 FH Settings Tab Descriptions
Tab
Mobile Unit
MicroAP
Encryption
IP Config
WLAN Adapter
9-4
Figure 9-1. Spectrum24 FH Settings Screen
The Mobile Unit tab configures the terminal ESSID, power management,
RTS threshold, International Roaming capability and AP options, see
Unit Tab on page 9-5.
The MicroAP tab sets the terminal to operate as an AP and establishes a
single-cell wireless network, see
The Encryption tab sets the WLAN adapter to make the wireless link less
vulnerable to information theft, see
The IP Config tab sets the IP address for the terminal, see
page 9-9.
The WLAN Adapter tab sets the hardware and radio settings. The password
protection feature is turned on and off from the WLAN Adapter tab,
Adapter Tab on page 9-10.
Description
MicroAP Tab on page 9-7.
Encryption Tab on page 9-8.
Mobile
IP Config Tab on
seeWLAN