Symbol PDT 8100 Series Product Reference Manual page 199

IP Status Tab
Select the IP Status tab to view the terminal's network address information. Unlike the IP
Config tab in Spectrum24 FH Settings
only with no user-configurable data fields.
Field
IP Type
IP Address
Subnet Mask
(Figure 9-5 on page
Figure 9-12. NICTT Properties - IP Status Tab
Table 9-9. IP Status Fields
If DHCP was selected from the IP Config tab, leased IP address and network
address data displays for the terminal. If Static was selected, the values
displayed were input manually in the IP Config tab on page 9-9.
The Internet is a collection of networks with users that communicate with
each other. Each communication carries the address of the source and
destination networks and the particular machine within the network
associated with the user or host computer at each end. This address is called
the IP address. Each node on the IP network must be assigned a unique IP
address that is made up of a network identifier and a host identifier. Enter the
IP address as a dotted-decimal notation with the decimal value of each octet
separated by a period, for example, 192.168.7.27.
Most TCP/IP networks use subnets in order to effectively manage routed IP
addresses. Having an organization's network divided into subnets allows it to
be connected to the Internet with a single shared network address, for
example, 255.255.255.0.
Spectrum24 Network Configuration
9-9), the IP Status tab is view
Description
9-17