Wlan Adapter Tab - Symbol PDT 8100 Series Product Reference Manual

PDT 8100 Series with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide

WLAN Adapter Tab

Use the WLAN Adapter tab to configure hardware and radio settings. Use the Card Type:
PCMCIA to specify the antenna type and the Radio Link Rate radio buttons to specify the
data rate supported.
Figure 9-6. Spectrum24 FH Settings - WLAN Adapter Tab
Field
Diversity Antenna
Radio Link Rate
Password
9-10
Table 9-6. WLAN Adapter Tab Fields
Select Diversity Antenna if dual antenna support is required. Diversity
improves communication in highly reflective environments. Do not select
diversity if a secondary antenna is not being used. Using diversity in a single
antenna application can cause poor wireless network performance.
Use the Radio Link Rate radio buttons to specify the data rate supported. The
terminal can use 1MB, 2MB or both. If Both 1MB and 2MB Support is
selected, the terminal defaults to a 1 Mbps data rate if a 2 Mbps data rate
cannot be established.
Spectrum24 FH Settings has a password protection feature that can be
turned on and off from the WLAN Adapter tab. When the Spectrum24 FH
Settings is initially launched, the password is off (default).
Description