Electrical Requirements - KitchenAid KFRS271TSS Technical Education

Electrical Requirements

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death or
electrical shock.
If codes permit and a separate ground wire
is used, it is recommended that a qualified
electrician determine that the ground path is
adequate.
Check with a qualified electrician if you are not
sure whether the grill is properly grounded.
A 120-volt, 60-Hz, AC-only, 15-amp, fused
electrical supply is required.
It is recommended that a separate circuit ser-
vicing only this grill be provided.
On freestanding models, the model/serial
number rating plate is located inside the grill
cabinet on the right-hand cabinet side. See the
following illustration.
A
A. Model/serial number plate
On built-in models, the model/serial number
rating plate is located on the right-hand side of
the grill. See the following illustration.
A. Model/serial number plate
2-5
A