KitchenAid KFRS271TSS Technical Education page 57

g) Remove six screws from both sides of
front of warming drawer and one screw
behind electrical control box.
Screws
1 of 6
i) Slide warming drawer assembly forward
till side access cover is outside of unit.
j) Disconnect wiring harness from red and
black connectors in electrical control
box and unscrew grommet hex nut.
Black and
Red Wires
Grommet
Hex Nut
2.
Screw
4-17
To remove warming drawer control.
a) Unplug grill or disconnect power.
b) Remove the warming drawer assembly
(see page 4-16 for the procedure).
c) Remove control knob and disconnect
and remove control indicator light.
d) Remove six screws from inside edge of
warming drawer.
Screws
1 of 6
Warming Drawer
e) Remove two screws from inside gasket
that holds warming drawer control to
electrical control box.
Screws
Continued on the next page.
Gasket