Electrical Requirements - KitchenAid KBNS361TSS00 Installation Instructions And Use & Care Manual

Freestanding and built-in installation instructions
Hide thumbs Also See for KBNS361TSS00:
Table of Contents

Advertisement

Available languages

Available languages

Cutout Dimensions - Outdoor Ice Maker
Dimension G
Dimension H
18" (45.7 cm)
34" (86.4 cm) min. to 341/2" (87.6 cm) max.
Warming Drawer Size
Dimension J
24" (61.0 cm)
221/2" (57.2 cm)
Cutout Dimensions - Built-in Utility Drawer and Built-in Trash Drawer
Dimension M
Dimension L*
12W' (31.1 cm)
11/2"(3.8 cm)
*Dimension L is the minimum mounting surface area around the opening for mounting the optional door or drawers.
Built-in Outdoor
Grill Enclosure Ventilation for LP Gas:
An enclosure for an LP gas fuel tank is to be ventilated by
openings at both the top and lower levels of the enclosure.
If converting to LP gas, these vents are to be in the
enclosure:
An enclosure for use with an LP gas fuel tank for built-in
installation is to have at least one ventilation opening on an
exposed exterior side located within 5" (12.7 cm) of the top is to
be a minimum of 20 in.2 (129.0 cm2). One ventilation opening
within 1" (2.5 cm) of the bottom of the enclosure and the bottom
opening is to be a minimum of 10 in.2(64.5 cm_). All vent
openings are to be unobstructed.
Every opening is to be a
minimum of 1/8"(0.32 cm) wide.
20 in. 2 (129.0 crn 2) rain.
ventilation
both sides
1" (2.5 cm)
10 in. 2 (64.5 crn 2)
ventilation
both sides
5" (12.7 cm) max.
_5"
(12.7 cm) max.
Electrical
Shock Hazard
Plug into a grounded
3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow these instructions can result in death,
fire, or electrical
shock.
A 120-volt, 60-Hz, AC-only, 15-amp, fused electrical supply is
required.
It is recommended
that a separate circuit servicing only this grill
be provided.
On freestanding
models, the model/serial
number rating plate is
located inside the grill cabinet on the right-hand cabinet side.
See the following illustration.
A
If codes permit and a separate ground wire is used, it is
recommended
that a qualified electrician determine that the
ground path is adequate.
Check with a qualified electrician if you are not sure whether the
grill is properly grounded.
A. Model/serial
number plate

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents