Removing Warming Drawer Assembly, Warming Drawer Control, Heating Element And Sensor - KitchenAid KFRS271TSS Technical Education

REMOVING WARMING DRAWER ASSEMBLY, WARMING
DRAWER CONTROL, HEATING ELEMENT, AND SENSOR
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. To remove warming drawer assembly.
a) Unplug grill or disconnect power.
b) Pull the warming drawer out to the fully
extended position.
c) Push down or pull up release tabs on
each drawer slide.
Drawer Slide
Release Tab
d) Remove warming drawer from drawer
slides in warming drawer assembly.
e) Remove storage drawer above warming
drawer using the same procedure as
removing warming drawer.
Drawer Slide
f) Remove tank storage drawer to right of
warming drawer using the same proce-
dure as removing warming drawer.
g) Remove screws from electrical access
cover on right side of warming drawer
assembly.
Screws
Electrical Access Cover
4-16
Warming Drawer
Control
Heating Element