KitchenAid KFRS271TSS Technical Education page 58

f) Disconnect control wires from warming
drawer control.
3. To remove heating element.
a) Unplug grill or disconnect power.
b) Pull the warming drawer out to the fully
extended position.
c) Push down or pull up release tabs on
each drawer slide.
Drawer Slide
Release Tab
Control
Wires
Electrical
Control
Box
d) Remove warming drawer from drawer
slides in warming drawer assembly.
e) Remove tank storage drawer to right of
warming drawer using the same proce-
dure as removing warming drawer.
f) Remove screws from electrical access
cover on right side of warming drawer
assembly.
Screws
Electrical Access Cover
g) Disconnect heating element wires from
heating element.
4-18
Heating Element
Wires
Electrical
Control
Box