KitchenAid KFRS271TSS Technical Education page 49

3. To remove a burner ignitor:
a) Remove the grates and the sear
plates.
b) Remove the control panel and the spark
module (see pages 4-2 and 4-3 for the
procedures).
c) Remove the four hex screws from the
front baffle, pull the top of the front baffle
forward, and remove it.
Front Baffle
Spark Igniters
Front Baffle
Screws
1 of 4
4-9
d) Remove the hex nut from the ignitor
bracket and slide the spark igniter out
the front of unit.
Spark Igniter
Continued on the next page.
Hex Nut